PROPER CARE & CLEANING
Excessive Weight Hazard
Ask two or more people to move and install the
water cooler and the bottles.
Failure to do so can result in back or other injury.
WARNING
General Cleaning
Perform: As needed
Time Required: 5 minutes.
Note: Do NOT use abrasive materials or chemical cleaners.
1. Clean the cabinet surfaces using a soft cloth and warm soapy water, then rinse.
2. Wipe dust at the back of dispenser to improve efficiency.
3. Remove the drip tray assembly by pulling it forward. Remove the cover. Place the tray and
cover in the dishwasher or wipe the parts clean using a soft cloth and warm soapy water.
Cleaning the Cold Reservoir and Water Lines
Perform: Every 3 months or whenever an off-taste occurs.
Time Required: 15 minutes.
Note: Best to do prior to loading a fresh bottle.
1. Unplug the power cord from the wall outlet.
2. Remove the water bottle.
3. Remove the bottle receptacle by turning it counterclockwise and pulling it up. Store it in a
safe place.
4. Remove the plastic baffle from inside reservoir. Clean it using warm soapy water, rinse, then
store it in a safe place.
5. Fill the reservoir with a mixture of 1 gallon tap water and 2 tablespoons of unscented
household bleach.
6. Let it sit for 30 minutes.
7. Remove the cleaning mixture from reservoirs by dispensing it from both taps into a pitcher.
8. Wipe the inside of reservoir with a soft cloth.
Model # 7LIECK-W-WL: Page 12
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-5WHIRL5 for assistance.