27
EN
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
FILL TANK WITH FRESH
WATER
Insuffi
cient water in the tank (A12).
Fill the tank with drinking water and/or insert it
correctly, pushing it as far as it will go until it clicks
into place.
INSERT WATER TANK
The tank (A12) is not correctly in place.
Insert the tank correctly and press as far as it will go.
EMPTY GROUNDS CONTAINER The grounds container (A4) is full.
Empty the grounds container and drip tray (A14), clean
and replace. Important: when removing the drip tray,
the grounds container must be emptied, even if it con-
tains few grounds. If this is not done, when you make
the next c
off
ees, the grounds container may
fi
ll up
more than expected and clog the machine.
INSERT GROUNDS CONTAINER
AND
After cleaning, the grounds container (A4)
has not been replaced.
Remove the drip tray (A14) and insert the grounds
container.
Summary of Contents for 400011239758
