15
Close door and check that door strike aligns with door
catch. If needed, slide door catch left or right within slot
to adjust alignment.
6.
Check door strike alignment
Super Wide Side-Swing Door
Place towel on top of dryer to avoid damaging the surface.
Open dryer door. Remove bottom screws from dryer cabinet
side of hinges. Loosen (do not remove) top screws from
dryer cabinet side of hinges.
Lift door until top screws in dryer cabinet are in large part of
hinge slot. Pull door forward off screws. Set door (handle side
up) on top of dryer. Remove top screws from dryer cabinet.
Remove screws attaching hinges to door.
Remove screws at top, bottom, and side of door (4 screws).
Keep door screws separate from hinge screws as they are
different sizes. Holding door over towel on dryer, grasp sides
of outer door and lift to separate it from inner door.
NOTE:
Do not pry apart with putty knife or screwdriver.
Do not pull on door seal or plastic door catches.
1.
Place towel on dryer
2.
Remove bottom screws
3.
Lift door off top screws
4.
Remove screws from hinges
5.
Remove screws from door
