Whirlpool 3405792, Use And Care Manual

Page: 17 / 56

17
C A R I N G F O R Y O U R D R Y E R
Removing accumulated lint
Lint can gather inside the dryer and be a fuel
for fire. Lint should be removed every two to
three years, or more often, depending on
dryer usage. Cleaning should be done by a
qualified person. If you have any questions,
contact your dealer, or nearest Inglis Limited
Appliance Service Branch.
For all electric dryers, or gas dryers
which have a lower front access panel
NOTE: See page 18 if your dryer is gas and
has a full front panel.
1. Unplug the power supply cord or turn off
the electrical power.
2. Remove back panel (electric) or lower
front access panel (gas). See the Installa-
tion Instructions.
3. Remove lint from shaded area in illustra-
tion with a soft brush or vacuum cleaner.
Avoid damaging wires, thermostats
(electric), funnel (gas), or ignitor (gas).
4. Replace panel.
5. Reconnect and level dryer again, if
necessary.
w
WARNING
Electrical Shock Hazard
Disconnect power before cleaning.
Replace all panels before operating.
Failure to do so can result in death
or electrical shock.
Electric dryer with back panel removed
Heat element
terminals Heater
box Thermostats
Funnel
Ignitor
Gas dryer with lower front
access panel removed