9
Using drain and spin
NOTE:
If your model has the Extra Rinse
option, move your selector to OFF.
A drain and spin may help shorten drying times
for some heavy fabrics or special-care items
by removing excess water.
1.
Push Cycle Control Knob in and turn
clockwise to SPIN, as illustrated.
2.
Pull Cycle Control Knob out. The washer
will drain and spin.
Permanent Press
Super Wash
S
pin
S
pin
Regular
Spin
S
pin
O
O
O
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi-
ately after filling; agitation can occur with the
washer lid up or down. After agitation starts,
the Cycle Control Knob turns clockwise until it
points to
O
(OFF) and the cycle ends.
The washer pauses briefly throughout each
cycle. These pauses are normal for washer
operation.
NOTE:
A Gentle Wash system helps protect
your fabrics by reducing wash agitation speed
during the last few minutes of wash agitation in
the Regular and Permanent Press cycles.
RINSE
WASH
Fill
▼
Wash selected time
▼
Drain (or partial drain
†
)
No agitation
▼
Spin
▼
Fill
▼
Rinse
▼
Drain-No agitation
▼
Spin-Spray rinse
▼
Spin
▼
Off
▼
†
The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
O P E R A T I N G Y O U R W A S H E R
