8
SECTION TWO
CONFIRMATION OF LEARNING
CONFIRMATION OF LEARNING
CONFIRMATION OF LEARNING
CONFIRMATION OF LEARNING
CONFIRMATION OF LEARNING
EXERCISES
EXERCISES
EXERCISES
EXERCISES
EXERCISES
In the blank to the left of the statement, place a T if the statement is TRUE or an F if the statement
is FALSE.
___1. This refrigerator/freezer is provided with a refrigerant heat loop that is foamed in place
around the freezer compartment door.
___ 2. Air flow from the freezer compartment to the refrigerator compartment is regulated through
a motorized air damper door.
___ 3. The defrost timer is located inside the freezer compartment control box.
___ 4. The defrost cycle is designed to occur after eight hours of compressor run-time.
___ 5. The defrost bi-metal thermostat is designed to open at 48°F and close at 13°F.
Label all of the components in the illustration below.
Summary of Contents for 1997 F
