Instruction Manual: Whipple Tomahaw k_R2
Last Updated: December 11
th
, 2017
Page 2 of 3
www.whipplesuperchargers.com
BACK
ENTER
UP
DOWN
1.
Connect the serial to OBD2 cable to the Tomahawk tool.
2.
Connect the Tomahawk tool to the factory OBD2 port and click the push button 1 time (with foot OFF brake), this is
the run/accessory position.
3.
Using the toggle buttons, select Request Cal File. Hit enter. The next screen will save the following TOMAHAWK.REQ
file to the supplied SD card.
4.
Remove the SD card from the Tomahawk tool by pressing it in until it springs out. Install the SD card in a memory
card reader on your PC/Laptop.
5.
the TOMAHAWK.REQ file, along with the following information. Note:
Typical response time is up to 24 hours from request time during normal business hours.
VIN NUMBER
MICROPROCESSOR
SERAIL NUMBER
TOMAHAWK
SERAIL NUMBER
VEHCILE TYPE
ENGINE SIZE
MODEL
YEAR
6.
Whipple Superchargers will email your calibration file which will be named TOMAHAWK.BIN and APP.LDR. Save these
files for future access. Drag/drop or save these files to the supplied SD card using a laptop/PC.
7.
Connect the Tomahawk tool to the factory OBD2 port and click the push button one time (with foot OFF brake), this
is the run/accessory position.
8.
For the Supercharged applications. Select “Programming” tab and click the enter button. Follow the onscreen menu
for flashing the vehicle.
