manualshive.com logo in svg

Whip Mix VeriBuild, User Manual, Page: 13 / 76

Share
Download
Whip Mix VeriBuild User Manual Download Page 13

06

What You Need

In addition to the printer, you must have several other items to make a complete print and use your printer effec-
tively. This section outlines the items that you need to acquire in addition to the items shipped with the printer.

2. Safety equipment

 – You should always wear chemical-resistant gloves when dealing with photopolymer resins.

Whip Mix also recommends wearing a respirator or face mask, and when dealing with the internal components 
of the machine, wear UV-protective glasses. When removing prints from a build platform, you may also want 
cut-resistant gloves for added safety in case your knife slips.

3. Cleaning alcohol

 – Most resins require isopropyl alcohol (99% solution) or ethylalcohol (95% solution) for cleaning.

Consult your resin distributor regarding the proper cleaning alcohol to use. In addition, you may want an alcohol 
bath, such as an ultrasonic cleaner.

4. Resin

 – the VeriBuild is tested with all Whip Mix Qura- resins, but you may use any 405 nm resin.

Minimum

Recommended

CPU 

Intel i3 2.0 GHz dual-core
AMD Athalon 2.0 GHz dual-core

Intel i7 2.6 GHz quad-core
AMD Phenom II X4/ X6 at 2.6 GHz quad-core

GPU

Dedicated GPU with 1 GB RAM

NVidia GeForce 830
AMD Radeon R7 M340

1920 

×

 1080

Display

1600 

×

 900

Memory (RAM)

4 GB

8 GB

Disk Space

1 GB

2 GB

Operating system

Windows 7 SP1, 8.1, or 10

Windows 7 SP1, 8.1, or 10

1. Computer

 – In order to run the Alpha 3D or Omega 3D print software, you will need a computer that meets the

following minimum requirements.

VeriBuild LCD 3D Printer

Summary of Contents for VeriBuild













































































Reviews:

No comments