WHILL C2 User Manual Download Page 35

Page: 35 / 114

WHILL Model C2/Ci2 User Manual

Operating procedures

This section explains the procedures for getting in and operating the device.

WARNING

Do not sit on the control pad, place the removed seat assembly upside down, or apply an
excessive load to the control pad. Do not press the control pad or switches with excessive force
or operate them with a sharp object.

There is a risk that the control pad may be damaged, rendering the device inoperable.

CAUTION

If the device is not used for a long period, ensure the battery is fully charged before storing.
Charge the battery at least once a month.

There is a risk that the battery may get excessively depleted and cannot be charged.

• This product is an electrical product. The waterproof performance is "IPX4", so please avoid using the product

in the rain as much as possible to prevent malfunction.

• When using the device for the first time, it is recommended that you use it in an environment with someone

around you.

Summary of Contents for C2



















































































































Search results

Summary of Contents for C2

Reviews:

Related manuals for C2

Brands by name

Popular brands

WHILL C2, User Manual

Search results

Summary of Contents for C2

Reviews:

Related manuals for C2

Brands by name

Popular brands