Page 2
MOUNTING
SURFACE
MOUNTING
SURFACE
Strain Relief
MOUNTING
SURFACE
5/16 - 18
ELASTIC
STOP NUT
Insert bolts into
extrusion here
GASKET
MOUNTING
SURFACE
FLAT MOUNT Model SUBKT4B
5/16" FLAT
WASHER
5/16 - 18 X 1
HEX HEAD
BOLT
MOUNTING
BRACKET
1/4 - 20
ELASTIC
STOP NUT
1/4" FLAT
WASHER
SPACER
5/16 FLAT
WASHER
5/16 FLAT
WASHER
5/16 FLAT
WASHER
Installation:
This manual covers several mounting options for the Summit lightbar. The brackets mount
approximately the same depending on your application. Refer to the illustration that covers
your model.
1. Insert the mounting bolts into the track in the rear of the Summit and slide them into position.
2. Secure the mounting brackets to the Summit with the supplied hardware.
3. Mount the Summit to the mounting area using the supplied mounting hardware.
4. Make sure all mounting hardware is tightened properly and extend the Summit control wires to your
control box. Refer to the instruction manual that comes with the Summit for fusing and connections.
NOTE: There is a wire strain relief clamp included with your mounting kit (See illustration).
IMPORTANT:
It is the responsibility of
the installation technician to make sure
that the installation and operation of this
product will not interfere with or
compromise the operation or efficiency
of any vehicle equipment! Before
returning the vehicle to active service,
visually confirm the proper operation of
this product, as well as all vehicle
components/equipment.
5/16 - 18
ELASTIC
STOP NUT
5/16
FLAT
WASHER
5/16
FLAT
WASHER
MOUNTING
BRACKET
SPACER
1/4 - 20
ELASTIC
STOP NUT
1/4" FLAT
WASHER
5/16" FLAT
WASHER
5/16 - 18 X 1
HEX HEAD
BOLT
Insert bolts into
extrusion here
GASKET
MOUNTING
SURFACE
EXTENDED MOUNT
Model SUBKT5B
5/16
FLAT
WASHER
5/16
FLAT
WASHER
5/16
FLAT
WASHER
5/16 - 18
ELASTIC
STOP NUT
5/16 FLAT
WASHER
MOUNTING SURF
ACE
Insert bolts into
extrusion here
MOUNTING
BRACKET
1/4 - 20
ELASTIC
STOP NUT
1/4" FLAT
WASHER
5/16" FLAT
WASHER
5/16 - 18 X 1
HEX HEAD
BOLT
5/16 - 18 X 1
HEX HEAD
BOLT
5/16 - 18 X 1
HEX HEAD
BOLT
SPACER
45 DEGREE MOUNT
Model SUBKT6B
