Page 6
=
May not be present on all Lightbars
Optional Equipment:
=
See
for fuse value
Main Fuse Chart
=
May not be present on all Lightbars
Optional Equipment:
=
See
for fuse value
Main Fuse Chart
GRN
B
LU
GRN
/WH
T TRAC
E
B
LU/WH
T TRAC
E
WH
T
/
GRN TRAC
E
WH
T
/
B
LU
YEL
WH
T
WH
T
/
B
LK
WH
T
/
BRN
GRN
/
B
LK
WH
T
/
ORG
WH
T
/YEL
B
LU/
B
LK
Front Corner Strobes
Rear Corner Strobes
Rear Inboard Strobes
T.A. / 2 Strobe Flash
Passenger Alley Light
Driver Alley Light
Take-Down Lights
Flasher "A"
Right Traffic Advisor
Front Inboard Strobes
T.A. / 4 Strobe Flash
Auxiliary Option
Flashing Take-Downs
Left Traffic Advisor
3 amps
3 amps
3 amps
3 amps
3 amps
6 amps
2.5 amps
2.5 amps
5 amps
5 amps
6 amps
5 amps
2.5 amps
6 amps
GRN
BLU
GRN/WHT TRACE
BLU/WHT TRACE
GRN/BLK
BLU/BLK
YEL
WHT
WHIT/BLK
WHT/BRN
WHT/GRN
WHT/ORG
WHT/YEL
WHT/BLU
WHT/VIO
Front Corner Strobes
Rear Corner Strobes
Rear Inboard Strobes
Front Outboard Strobe
Rear
Passenger Alley Light
Driver Alley Light
Take-Down Lights
Flasher "A"
Front Inboard Strobes
Outboard Strobe
Flashers "B"
Auxiliary Option
Flashing Take-Downs
Work Lights
Flashing Work Lights
WIRE
FUNCTION
3 amps
3 amps
3 amps
3 amps
3 amps
3 amps
2.5 amps
2.5 amps
5 amps
5 amps
5 amps
5 amps
2.5 amps
5 amps
2.5 amps
CURRENT
DRAW
EXAMPLE:
Using the WHITE/BLACK, WHITE,
& WHITE/ ORANGE function wires, the total amp
draw is
ou
17.5 amps. Multiply this by 1.25 which
comes out to 21.87 amps. Y
must fuse the
RED power wire at 25 amps.
To use the chart below: After determining which
function wires you will use, add up the amp rating
of each function wire. You must then multiply this
by 1.25 (see warning) and fuse the RED power
wire at this rating.
MAIN FUSE CHART
GREEN -
BLUE -
GREEN/WHITE TRACE -
BLUE/WHITE TRACE -
-
-
VIOLET -
YELLOW -
WHITE -
WHITE/ORANGE -
WHITE/BLACK -
WHITE/BROWN -
-
*
WHITE/YELLOW -
WHITE/BLUE -
NONE -
WHITE/VIOLET -
WHITE/RED -
T
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
RFI shield drain wire; connect to Ground
In factory default configuration, this activates
In the factory default configuration, this wire activates
In factory default configuration, this wire activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
his will initiate low power operation of all strobes
Front Corner Strobes
Rear Corner Strobes
Rear Inboard Strobes
Front Outboard Strobes
Rear Outboard Strobes
Passenger Alley Light
Driver Alley Light
9MH2 Take-Down Lights*
Front Inboard Strobes
(See: Low Power Violet)
9MTD2 Take-Down Lights*
Flasher "A" *
Flasher "B"
Flashing Take-Downs*
Work Lights*
Flashing Work Lights
Not Used
GREEN/BLACK
BLUE/BLACK
WHITE/GREEN
or Aux. Lights
not used if 9MTD2 is present
not used if 9MTD2 is present
GREEN -
BLUE -
GREEN/WHITE TRACE -
BLUE/WHITE TRACE -
WHITE/GREEN TRACE -
WHITE/BLUE -
VIOLET -
YELLOW -
WHITE -
WHITE/ORANGE -
WHITE/BLACK -
WHITE/BROWN -
*
GREEN/BLACK -
WHITE/YELLOW -
BLUE/BLACK -
NONE -
WHITE/RED -
In the factory default configuration, this wire activates
In factory default configuration, this wire activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
This will initiate low power operation of all strobes
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
In factory default configuration, this activates
RFI shield drain wire; connect to Ground
Front Corner Strobes
Rear Corner Strobes
Front Inboard Strobes
Rear Inboard Strobes
2 Strobe T.A. Flash
4 Strobe T.A. Flash
See: Low Power Violet
Passenger Alley Light *
Driver Alley Light *
9MTD2 Take-Down Lights *
9MH2 Take-Down Lights *
Flasher "A"
Right Traffic Advisor *
Flashing Take-Downs *
Left Traffic Advisor *
Not Used
or Aux. Lights
not used if 9MTD2 is present
not used if 9MTD2 is present
CONTROL
CABLE
CONTROL
CABLE
NONE -
RFI Shield Drain
NONE -
RFI Shield Drain
BLACK -
Ground/8 AWG
BLACK -
Ground/8 AWG
RED -
+12 VDC/8 AWG
RED -
+12 VDC/8 AWG
POWER
CABLE
POWER
CABLE
EDGE® 9M SERIES LIGHTBAR for MODELS EQUIPPED with STROBE TRAFFIC ADVISOR™
EDGE® 9M SERIES LIGHTBAR
WIRE
FUNCTION
CURRENT
DRAW
EXAMPLE:
Using the WHITE/BLACK, WHITE,
& WHITE/ ORANGE function wires, the total amp
draw is
ou
17.5 amps. Multiply this by 1.25 which
comes out to 21.87 amps. Y
must fuse the
RED power wire at 25 amps.
To use the chart below: After determining which
function wires you will use, add up the amp rating
of each function wire. You must then multiply this
by 1.25 (see warning) and fuse the RED power
wire at this rating.
MAIN FUSE CHART
