Page 1
©2021 Whelen Engineering Company Inc.
Form No.14D18
D
(03
28
22)
Installation Guide:
WeCanX™ V2V Sync Module
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Internet:
www.whelen.com
Sales e-mail:
Customer Service e-mail:
For warranty information regarding this product, visit
www.whelen.com/warranty
A
uto
m
otiv
e:
S
erial C
om
m
unicatio
ns
WARNING:
This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to www.P65Warnings.ca.gov.
©2021 Whelen Engineering Company Inc.
Form No.14D18D (032822)
Installation Guide:
WeCanX™ V2V Sync Module
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Internet:
www.whelen.com
Sales e-mail:
Customer Service e-mail:
For warranty information regarding this product, visit
www.whelen.com/warranty
A
uto
m
otive:
S
erial C
om
m
un
ication
s
WARNING:
This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Mounting the V2V Module
WINDOW
MOUNTING
Mounting to Dash, Rear Deck or other surface:
Mounting to Vehicle:
It is recommended you mount the module to the dashboard or rear deck of the vehicle however it can be mounted to any surface or
window. If mounted to a window it is recommended to use 3M SJ3560 Dual Lock tape. The module
be mounted face up
must
(side with logo). This is the side that receives the signal. If mounted to a window, the face must point out of the vehicle.
8 X 3/4 Phillips
Pan Head
Sheet Metal
Screw
Mounting Surface
Front (side with logo)
of Module must face up
IMPORTANT:
an module and
Cle
mounting surface with an
isopropyl alcohol wipe prior to
mounting.
It is the responsibility of the
installation technician to
make sure the installation
and operation of this product
will not interfere with or
compromise the operation or
efficiency of any other vehicle
equipment!
IMPORTANT!
Before returning the vehicle
to active service, visually
confirm the proper operation
of this product, as well as all
vehicle components or
equipment.
Mounting the V2V Module
WINDOW
MOUNTING
Mounting to Dash, Rear Deck or other surface:
Mounting to Vehicle:
It is recommended you mount the module to the dashboard or rear deck of the vehicle however it can be mounted to any surface or
window. If mounted to a window it is recommended to use 3M SJ3560 Dual Lock tape. The module
be mounted face up
must
(side with logo). This is the side that receives the signal. If mounted to a window, the face must point out of the vehicle.
8 X 3/4 Phillips
Pan Head
Sheet Metal
Screw
Mounting Surface
Front (side with logo)
of Module must face up
IMPORTANT:
an module and
Cle
mounting surface with an
isopropyl alcohol wipe prior to
mounting.
It is the responsibility of the
installation technician to
make sure the installation
and operation of this product
will not interfere with or
compromise the operation or
efficiency of any other vehicle
equipment!
IMPORTANT!
Before returning the vehicle
to active service, visually
confirm the proper operation
of this product, as well as all
vehicle components or
equipment.
