Wheeltech Monte Carlo Electric Scooter
Page 12 of 12
Owner’s Handbook (Part Code: Z40969)
§
Stopping
1. Release the wigwag paddle completely. The vehicle will naturally brake and stop.
2. Turn the scooter off at the key ignition. Then pull out the key.
F
Attention
♦
The stopping distance will vary with your forward / reverse speed. Therefore please begin braking as
early as you can.
♦
While parking your scooter, be sure to park on flat ground and then turn the power to “OFF” before you
get off.
§
Main Circuit Breaker (Reset Button)
When the voltage in your scooter’s batteries becomes low or
the scooter is heavily strained because of excessive loads or
steep inclines, the main circuit breaker may trip to protect
the motor and electronics from damage.
The location of the circuit breaker is shown by the arrow on
the photograph (left).
If the circuit breaker is activated (tripped) simply push the
black button back in to reset the circuit breaker. Please note
the normal position of the circuit breaker button as a point of
reference. The button protrudes by 2mm – 3mm when
operating normally, and protrudes by 7mm – 8mm when the
circuit breaker has activated.
