P83966 C
Sheet 2 of 4
WARNING: WHEELOCK STRONGLY RECOMMENDS THAT THE VOLTAGE APPLIED TO THESE PRODUCTS
BE WITHIN THEIR RATED INPUT VOLTAGE RANGE. THE APPLICATION OF IMPROPER VOLTAGE MAY
RESULT IN DEGRADED OPERATION OR DAMAGE TO THESE PRODUCTS, WHICH COULD RESULT IN
PROPERTY DAMAGE AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.
NOTES:
1.
Power Handling Capacity (RMS): 15W
2.
Sound Dispersion: 70 Degrees
3.
Constant Voltage Line: 25Vrms or 70Vrms
4.
Frequency Response: UL rated at 400 - 4,000Hz (@ Full Rated Output), Anechoic 400 – 14,000 Hz.
5.
Sound Level (Peak): 120dB @ 15W, 1 Meter
6.
Dimensions: 7-7/8W X 8-3/4H X 9-5/16L
CAUTION:
Do not place switch in settings marked "not used". Failure to comply with these restrictions may cause damage to
components and will void the warranty.
STROBE
:
Table 2A: Rating Per UL
Model
Code
Lens
Color
Rated
Voltage
Input
Current
Flash
Rate
Typ. Eff.
Candela
DC-MAX-C
Clear
10.5 to 31.0 VDC
See Table 2b
60/Min Typical
100cd
Table 2B: DC-MAX-C Input Current Versus Input Voltage
Voltage (VDC)
12
24
Current (mA)
1010
470
NOTES
:
1.
Temperature range for all models is -30
°
F to +150
°
F (-35
°
C to +66
°
C)
2.
Flash energy and flash rate are specified for double flash operation.
3.
Effective candela is measured per IES specifications.
INSTALLATION INSTRUCTIONS:
SPEAKER WATTAGE SELECTOR SWITCH SETTING:
1.
Remove the cable entrance interface adaptor and gasket. (See Installation Sheet P82697)
2.
Adjust the Speaker Wattage Selector Switch for the desired dB and wattage setting (Table 1) for each speaker.
3.
Replace the cable entrance interface adaptor and gasket.
APPLICATION NOTES:
1.
Loosen the 4 Phillips screws holding the cover plate and MAX-DC-C Strobe to the enclosure box. (Figure 1)
2.
Remove the cover plate and MAX-DC-C Strobe.
Figure 1: Phillips Screw Location
COVER PLATE AND STROBE
PHILLIPS SCREWS-4X
3.
Mount the speaker assembly to the desired location.
4.
Punch out desired knockouts and attach conduit and fittings.
