P84502 C
Sheet 3 of 6
Figure 2:
POS 1
POS 2
POS 3
POS 4
SLIDE HERE FOR (0N)
SLIDE HERE FOR (OFF)
USE A SMALL SCREWDRIVER TO
CHANGE THE SWITCH POSITION.
Table 2: Audio Input Voltage Mode Selection
Switch Settings (SW1)
Audio Input Voltage Mode
POS 1
0.5 V RMS
ON
25 V RMS
OFF
Table 3: Sound Output Level Selection
Switch Settings (SW1)
Sound Output
Level
Relative Level
(dB)
POS 4
POS 3
POS 2
A
1
+6
(typical)
OFF ON OFF
B
1
+3
(typical) OFF
ON
ON
6
2
0
(Reference) OFF
OFF
OFF
5 -3
3
(typical) OFF
OFF
ON
4 -6
3
(typical) ON
ON
OFF
3 -9
3
(typical) ON
ON
ON
2 -12
3
(typical) ON
OFF
OFF
1 -15
3
(typical) ON
OFF
ON
NOTES:
1.
These settings are not to be used in UL Listed applications
and should be used in non-UL Listed applications only when
the audio input level is not at the rated value – 0.5 V RMS for the 0.5-V mode and 25 V RMS for the 25-V mode – to
provide 3- or 6-dB compensation for line losses and/or low drive levels.
Using these settings while applying the rated audio
input to the appliance will cause excessive distortion and increased current consumption, and it is not a recommended
operating condition.
2.
This is the setting used as a reference level for the other settings in this table.
3.
These are
typical
values with respect to the reference level (Sound Output Level 6: 0 dB), and are included only to assist the
user in choosing a setting during installation.
However, use the values in Table 1, not these values, for the actual sound
output levels.
WARNING: DOUBLE CHECK SWITCH (SW1) SETTINGS TO MAKE SURE THEY ARE CORRECT.
IMPROPER SETTINGS CAN DAMAGE THE UNIT OR RESULT IN A DISTORTED OUTPUT OR A dBA SOUND
OUTPUT LEVEL THAT IS BELOW CODE REQUIREMENTS FOR PUBLIC MODE FIRE PROTECTION, WHICH
COULD RESULT IN PROPERTY DAMAGE AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.
