10
Important - Final Assembly and Functional Checks
Place wheelchair in the upright position
–
observe the front-to-rear angle as viewed from
the side. Adjust components to achieve the correct angle for the safety and comfort of user.
* Secure all hardware
–
do not over-tighten.
* Ensure the Wire Lock Pin is fully inserted in the front extension tubes and clipped securely.
* Ensure that Quick Clip Pins secure rear wheels, and Hitch Pin secures the front caster.
* Ensure that the Wheel
EEZ
® balloon wheels are properly inflated
–
review information card
supplied with the wheels or
refer to the tire’s sidewall.
Disassembly of your Conversion Kits are in reverse of assembly.
General Maintenance and Cleaning
We advise a clear-water rinse of all components after each use, especially after exposure to
salt water, as well as prior to storage.
If sand or debris has entered between the wheels and axles, disassemble, rinse thoroughly and reassemble.
Wheel
EEZ
® balloon wheels: We recommend a clear-water rinse after each use. In addition, we advise regular
pressure checks to ensure proper inflation.