Multi Play
WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
Tel. Ze49 74 20 / 8 89-0
Fax Ze49 74 20 / 8 89-51
E-Mail:
Web:
www.whd.de
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD
.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Version
(Technical and optical
modifications reserved)
28.09.2015
Operation
Thank you for buying our WLAN audio receiver for hidden mounting.
Please read this manual carefully, especially the safety and security information.
Manual WR 205
Applicable for
113-014-00-205-00
Safty & Security Informations
Improper handling may void warranty!
In addition to this guidance please comply with your own country-specific safety & security
regulations.
The device is not suitable for outdoor operation.
- The electrical supply must be disconnected before working on the device.
- Keep the original packaging (for returning products under warranty).
- Protect the product and the components supplied against dripping or splashing. Make
sure, as with all electronic products that no liquids can access any part of the system. This
may cause a malfunction or fire.
- Do not expose the product to temperatures above 30° C.
- Do not expose the product to electrostatic discharges.
- Never put the product near heat sources such as radiators, heat registers, stoves or other
types of devices that produce heat.
!
Please note the country-specific safety guidelines for use and operation of WLANs.
!
For continued flawless audio transmission you should always use a wireless router from
802.11n and the latest smartphones / tablets.
Product registration and extended warranty at:
www.whd.de/Produktregistrierung
Mounting and connections
- Install the cables (230V, speaker cabel) for the WR 205 in accordance with installation gui-
delines, and your desired port scenario
- If the device shold be inserted through a cut out, make sure that it fits in.
!
Obstruct the device only in locations that ensure sufficient temperature dissipation.
Not e.g. in wool, because the device can drop out at high temperature.
Connecting power supply
- Cables between transformer and lamp < 2m.
- Power line cables to be kept at a distance of 5-10 cm from speaker
cables (AC coupling).
- RF cables to be kept at a great distance from any metal surfaces
(reduction of capacitive coupling).
- When the RF cable to the transformer is > 2m twist the single wires.
- Power line cable and RF cable not too close to the WR 205.
- Power line cables are not to be crossed or to run at right angles.
Connecting speakers
With the use of electronic transformers (lighting) and
BTR 205, the following points have be observed to avoid
potential problems:
- Open access panel of
the housing
- Connect 230 V cable
according to imprint
!
When power is connec-
ted the WR 205 is auto-
matically in Pairing
Mode.
Connect speker cable
according to imprint
Max. per output:
1x 4
Ω
speaker
2x 8
Ω
speaker ||
5x 20
Ω
speaker ||
OUT L -
L +
OUT R -
R +
4 - 8 Ohm
110-230 V
50/60 Hz
Specifications
WR 205
Power Supply
110…230 V AC
Music Power
2 x 5 W
Speaker Impedance
4 ohms each
WLAN Standards
IEEE 802.11b/g/n
up to 150 Mbps
Protocols
Airplay, UPnP, DLNA
Maximum distance between
tansmitter an receiver
up to 30m*
(* … a wireless radio frequency
site survey is recommended in
harsh environments)
Dimensions (H/W/D)
71 x 145 x 29,5 mm
Weight
0,220 kg
Operating Temperature
0 °C … +30 °C
Multi Play is defined as the simultaneous play-
back of a music player on several
WR 205
.
Using the
WHD Multiroom Audio Player App
you can, for example, play music in several
rooms simultaneously.
!
All WR 205 have to share the same wireless
network with min. 150 Mbps.
!
Use the
WHD Multiroom Audio Player App
only.
Direct Play
1. Enter WLAN menue at your smartphone,
tablet or PC and seek for available wireless
networks.
2. Select
WHD-Air + MAC address
. Your
smartphone, tablet or PC connects to the WR
205. Now you can send music from your
smartphone, tablet or PC, directly to the WR
205.
!
Some playback devices and players also have
a WiFi-Direct connection without pre-
connecting.
WLAN Operation
1. Enter WLAN menue at your smartphone,
tablet or PC and seek for available wireless
networks.
2. Select
WHD-Air + MAC address
. Your
smartphone, tablet or PC connects to the WR
205.
3. Start the
WHD Multiroom Audio Player
App
, which you can download via App Store or
Google Play Store for free.
4. Select in the WHD Multiroom Audio Player
App the „
Assistent
“ and follow the user
prompts.
!
The App connects the WR 205 to your
WLAN. This procedure may take a few minutes.
