Operation
Thank you for buying our Ecxiter.
Please read this manual carefully, especially the safety and security information.
Positioning
- Preferably to materials, which are mounted oscillating, not as on
the entire surface bonded surfaces.
- Centrally as possible on the surfaces, max. away from edges or any
restraints so that the exciter, the material max. may well excite oscil-
lations.
Mounting Exciter
Safety & Security Informations
Improper handling may void warranty.
In addition to this guidance please comply with your own country-
specific safety & security regulations.
Intendes Use:
Indoors
Operating Temperature:
-20 ... + 60 °C.
The device is not suitable for outdoor operation.
Notes:
- Make sure that the resulting impedance and the power of the
connected speakers are properly sized to the output of the amplifier
safe.
- Ensure correct polarity.
- Before the removal of the speaker, switch OFF the amplifier.
- Do not operate the Exciter on magnetizable surfaces. This affects
the function.
- Do not place the Exciter in the vicinity of CRT monitors, floppy
disks, hard disks, credit cards, and video and audio cassettes.
Pasting the Exciter
On smooth surfaces, it can not be screwed.
! The exciter should not be adhered to a vertical surface.
It may fall down.
Screwing Exciter
- Mount the Exciter on the surface with the screws (4).
X.32-4 / X.32-8 / X.32-16
- Remove the foil of double-sided tape on the front part (1) and
press Exciter to cleansed face.
- Connect Exciter cable (2).
WHD - Wilhelm Huber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
Tel. Ze49 74 20 / 8 89-0
Fax Ze49 74 20 / 8 89-51
Cable
Exciter X.32-4/8/16
WT/RD
(WT/BL)
0
RD
(BL)
4 Ohm
E-Mail:
Web:
www.whd.de
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD
.
Manual Exciter X.32-4
X.32-8
X.32-16
Applicable for
4 ohms:
130-032-00-004-00
8 ohms:
130-032-00-008-00
16 ohms:
130-032-00-016-01
Specifications
Exciter X.32-4/8/16
Load Rating / Music Power
6/15 W
Impedance
4/8/16 ohms
SPL (1W/1m)
Depd. on material
Frequency Range
Depd. on material
Transm. Angle
1/2/4/8 kHz (-6 dB)
Depd. on material
Mounting Depth
26 mm
Weight
0,126 kg
Operating Temperature
-20°C ... + 60°C
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Version
(Technical and optical
modifications reserved)
26.02.2019
Connecting Exciter
The speakers must be connected with separate wires.
Never use the same wires
.
At an amplifier impedance of
minimum 4 ohms
per chanel connect
one X.32-4, two X.32-8 or four X.32-16 parallel.
!
Ensure correct polarity.
Proposed positions
Note on the thermal fuse:
If the exciter is connected to an amplifier > 6 watts, the built-in ther-
mal fuse prevents destruction of the device.
