6
4.
Features
z
Up to 5 channels (zone)
z
6 selectable input s MIC 1 (First Priority)
z
Bass, treble, and volume control for each channel
z
Voice priority function on MIC. 1
z
Overload, over temperature, and speaker short protection.
z
8 ohm, 70V, and 100V output
z
AC power in
z
2U
height
z
19” rack or table mounted
5. Power Source
z
AC Power Source
The supply transformer has been designed for use on either 115V or 230V, (50-60Hz),
selected by a push switch on the rear panel. The amplifier is factory set at 230Vac mains
voltage. When you switch the amplifier to 115V , the internal fuse must must be changed
from 4 to 8 amp.
6. Connection
z
Microphone Connection
Mic1~2 inputs are unbalanced standard 1/4” Phone Jack.
Mute Function
Priority Microphone, Mic1 input has VOX priority over CH 1~5. Press the push switch of
each channel on the front panel to mute the corresponding signal source.
General Mute Function
Input at the backside for mute of all 5 channels
.
Use potential free relay contact.
