WHD - Wilhelm Hu-
ber+Söhne GmbH+Co.KG
Bismarckstr. 19
D-78652 Deißlingen
Tel. Ze49 74 20 / 8 89-0
E-Mail:
Web:
www.whd.de
This product supports all CE-
marking criteria. The declaration of
conformity certificate can be ob-
tained from WHD
.
WHD are members of the INTERSEROH association.
We participate in the dual system as well as other
industry-specific solutions. Therefore, plastic, metal
and electronic parts can all be recycled.
Operation
Thank you for buying our new generation WiFi receiver.
Please read this manual carefully, especially the safety and security information.
Manual AirBridge PRO
Applicable for
124-322-00-100-10
General information on the operation of the devices:
Analog output (OUT)
Connect an audio device that has an analogue input with the included
3.5 mm jack / jack cinch cable to play music received from the Air-
Bridge PRO.
Optical output (S / PIDF OUT)
Connect an audio device that has an optical digital input with the in-
cluded fiber optic cable to play music received from the AirBridge PRO.
!
Remove dust caps from the connectors of the optical fiber cable!
Analog and digital input for the local zone
The AirBridge PRO offers the possibility to also use music sources,
which are connected either via the analog or digital input (analog IN,
SPDIF IN).
!
The cables for this are not included in the delivery.
USB for the local zone
A standard mass storage device (such as a USB dongle or hard disk) is
connected to the USB port. The WHD Multiroom Player app recogni-
zes these as media servers.
Setting the factory condition:
Press the WPS / Reset button for about 4 seconds.
!
This process can take up to 2 minutes.
Device name: WHD-WR XXXX
The Bluetooth device name corresponds to the W / LAN device name.
WPS function (WiFi protected setup):
Two WLAN-capable devices are connected by a button press.
!
In order to use the WPS function, a router with WPS function must
be present.
Activation of Bluetooth functionality in W / LAN mode:
Open the WHD Multiroom App to enable or disable Bluetooth visabili-
ty and funcionality. Use Settings -> Speaker Settings -> Bluetooth Set-
tings -> "Device Name".
Operation with W/LAN:
Use the
WHD Multiroom app
.
Please also note the following information
- the WHD guide WLAN-Audio
- the WHD manual for the Multiroom APP
- the WHD manual for DSP components
- general basics network technology (LAN / WLAN)
- the operating and configuration instructions of your router
- Information and assistance to your network and / or service provider
Bluetooth operation
The device has a 3 minutes visibility for all Bluetooth devices after turning on. You can
pair your Blutooth audio source within this time period.
!
After 3 minutes, the speaker will no longer be visible in the Bluetooth environment.
Perform the PAIRING according to your device.
Make sure your device meets the required Bluetooth specification. The pairing process
varies greatly from device to device.
!
Please read the operating instructions of your Bluetooth-compatible device carefully.
General process of pairing:
Connection
between AirBridge PRO and the Bluetooth enabled mobile device approxi-
mately 1 ... 5 m.
!
Activate the Bluetooth feature of your mobile device and put it in search mode and
select "
WHD-WR XXXX
".
!
You can rename the device at any time via the WHD Multiroom APP.
!
If a password prompt occurs, enter
"0000"
or the PIN *) from the sticker on the
device.
Disconnect the Bluetooth connection:
Disconnect the connection according to your device.
!
To change to the (W) LAN mode, please use the WHD Multiroom APP for operation.
FAQs
Why does my device no longer connect to the AirBridge PRO HS after leaving the
reception area?
- You may have been outside the reception area for more than 5 minutes. Please per-
form the connection setup again manually via your terminal.
- There may be another Bluetooth enabled device connected to the AirBridge PRO.
Disconnect it and reconnect to your device.
How many different Bluetooth devices can the AirBridge PRO manage?
Up to 8 de-
vices (ninth replaced first).
Can I play music from a paired Bluetooth devices, even if the AirBridge PRO is in
WiFi mode?
Yes. If there is a Wifi playback will be stopped and your Bluetooth music
will be played.
Direct Play
1. Enter WiFi configuration on your smartphone,
tablet or PC and seek for available wireless net-
works.
2. Select
WHD-WR XXXX
. Your smartphone, tab-
let or PC connects to the AirBridge PRO. Now you
can steam music from your smart-phone, tablet or
PC, directly to the AirBridge PRO.
!
Some playback devices and players also have a
WiFi-Direct connection without pre-connecting.
W/LAN Operation
1. Enter WiFi configuration on your smartphone,
tablet or PC and search for available wireless net-
works.
2. Select
WHD-WR XXXX
.
Your smartphone, tab-
let or PC connects to the AirBridge PRO.
3. Start the
WHD Multiroom Audio Player App
,
which you can download via App Store or Google
Play Store for free.
4. Select the „
Assistent
“ in the WHD Multiroom
Audio Player App and follow the user prompts.
!
The App connects the AirBridge PRO to your W/
LAN. This procedure may take a few minutes.
!
You can also connect the device via the
WPS
function. You will need a router that supports
WPS. Press the WPS button on your router. After-
wards press the WPS /Reset button on the
AirBridge PRO.
Multi-Play
Multi Play is defined as the simultaneous playback
of a music player on several
AirBridge PRO
. Using
the
WHD Multiroom Audio Player App
you can,
for example, play music in several rooms simulta-
neously.
!
All AirBridge PRO have to share the same wirel-
ess network with min. 150 Mbps.
!
Use the
WHD Multiroom Audio Player App
only.
Version
(Technical and optical
modifications reserved)
10.10.2019
- page 2 -
