USER INSTRUCTIONS: WH-S8 & WH-S10 SUBWOOFER
OPERATING YOUR SUBWOOFER
Check that all connections to the subwoofer have been properly made and that the main volume control is at minimum. Plug the
supplied power cord into the mains socket on the rear panel.
Initial Settings
Volume Control:
Set the subwoofer volume control to the minimum before proceeding.
Crossover Control:
Adjust frequency to integrate WH-S8 or WH-S10 subwoofer with your system requirement.
Phase Switch:
The Phase switch should be initially set to 0°.
Switching On
Plug in the mains plug and switch the power on. Now switch the subwoofer on with the rest of your system.
When switched on, the power indicator light will glow and the subwoofer will be operational.
Basic Tuning
Volume Setting:
Play a programme with extended bass and set the system volume to a resonal level. Adjust the subwoofer
volume control to produce the desired level of bass. The bass should be even and an extension of the main loudspeakers. Do not
set the control too high or you will swamp the sound with too much bass and clarity and definition will suffer.
Phase Switch:
If the bass is indistinct or lacks depth, the Phase switch may need adjustment. Set the switch to 0°and listen
carefully to some music with extended bass. If there is insufficient bass output from the subwoofer set the Phase switch to 180°.
Select the position which produces the most natural, extended bass.
Crossover Adjustment:
This adjusts the blend between the subwoofer and the main speakers and enables the system to be set
up for optimum bass performance. The higher settings are for use with small bookshelf loudspeakers, the lower setting for large
floorstanding models. If you choose too low a setting with small speakers, there will be a ‘hole’ in the bass response; too high a
setting with large speakers will result in the upper bass becoming bloated. Again the subwoofer should be an extension of the
main loudspeakers.
Auto-Power Switch:
This feature reduces the power consumption when there is no music signal. When the Auto-Power Switch is
on, the amplifier will be activated immediately once an audio signal is detected at the inputs, and it will turn into the mute status
when no signal is detected for about 20 minutes, which lowers the power consumption. This feature can be made invalid by
setting this switch to off.
Mains Operation
When the system is not in use for extended periods, we suggest you switch off the subwoofer to protect it from switching noises
caused by domestic appliances, etc. The best practice is to switch the complete system on and off from a central point. Bear in
mind that if you play the system with the subwoofer switched off you will get no bass!
Always turn the main volume control to minimum when you switch the system on or off.
