WH 2 Centre Loudspeaker
The Wharfedale WH 2
Centre speaker is a
dedicated centre
channel unit designed
f o r m o u n t i n g
preferably above, or
below, a TV screen. If
the unit is mounted
on top of the
television, move it
forward so that the
front grilles are level
with or slightly in
front of the screen.
This will reduce sound
reflections from the
top of the cabinet.
The loudspeaker
should be located on
a stable flat surface to avoid any danger of movement
when it is vibrated by high sound levels.
The speaker is supplied with four self-adhesive feet. Apply
one to each bottom corner of the unit before mounting.
CONNECTION
You will need a single length of twin core cable. Connect
the red (+) terminal of the centre unit to the red (+)
terminal of the amplifier’s centre channel output. Connect
the Black (-) terminal of the centre unit to the
corresponding Black (-) terminal of the amplifier. The
connection panel uses screw terminals - the drawing
opposite illustrates the connection method.
WH 2 Rear Loudspeakers
The Wharfedale WH 2 rear speakers are bipolar units
designed for wall mounting and intended for use solely as
rear effects speakers.
T
PREPARATION
Each speaker is supplied with four self-adhesive feet.
Apply one to each rear corner before mounting.
CONNECTIONS
You will need one length of twin core cable per speaker.
Connect the red (+) terminal of the left rear unit to the
red (+) terminal of the amplifier’s left rear channel
output. Connect the Black (-) terminal of this unit to the
corresponding Black (-) terminal of the amplifier. Repeat
for the Right speaker. The connection panel uses screw
terminals - the drawing above illustrates the connection.
MOUNTING
Connect the cable to the speaker. Site the speakers about
600 mm above the listening position and 2.5-3.5 metres
apart, central to the listener and behind the listening
position. Ensure that the wall is sound and can support
the product. Fix a suitable screw firmly to the wall leaving
a stub of 5mm protruding from the wall. Align the hole in
the mounting bracket over the screw head and carefully
lower the unit onto the screw. The speaker should now be
securely attached with the feet against the wall. Now
connect the speakers to the amplifier.
In a Home Theatre system, the directional cues come from
the front and centre channels. The rear channels provide
ambience and rear perspective and for this purpose a
bipolar design with its mix of direct and reflected sound
is ideal. o aid this effect we recommend placing the WH 2
rear speakers in a high position behind the listener
.
Preparing
Speaker
Cables
Centre Channel Connections
Wall-mounting the
WH 2 Rear
Loudspeakers
Rear Channel Connections
Connecting
Speaker
Cables
Centre Speaker
Positioning
