OPERATING MANUAL
OUTPUT SECTION
1. Group Outputs - individual line level outputs for each of the group busses.
2. Line In - stereo input for consumer devices such as CD players.
3. Lamp - for connecting a standard 12v BNC gooseneck lamp.
4. Sub/Aux output - direct output for the Sub/Aux buss. The LPF can be set at 80Hz or 120Hz or
bypassed. This can be used to feed subwoofers or as an additional auxiliary buss.
5. Main Outputs - the main mix outputs. Balanced XLR and balanced/unbalanced ¼” TRS
connectors are simultaneously available. Used to supply signal to your main amplifiers/speakers.
6. Mon 1 - Mon 1 buss output, for stage monitors or headphone amps.
7. Mon 2 - Mon 2 buss output, for stage monitors or headphone amps.
8. FX 1 - FX 1 buss output
9. FX 2 - FX 2 buss output
10. FX Bypass - footswitch input, used to bypass the internal FX processing.
11. Phones - headphone level stereo ¼” TRS output with volume control.
12. LPF - lowpass filter for the Sub/Aux buss. The On/Off switch activates the filter and the Freq
switch toggles the crossover point from 80Hz to 120Hz.
13. Sub/Aux - controls the level of the Sub/Aux output, AFL allows you to monitor the output in
isolation.
14. Mon 1 - controls the level of the Mon 1 output, AFL allows you to monitor the output in isolation.
15. Mon 2 - controls the level of the Mon 2 output, AFL allows you to monitor the output in isolation.
16. FX 1 - controls the level of the FX 1 output, AFL allows you to monitor the output in isolation.
17. FX 2 - controls the level of the FX 2 output, AFL allows you to monitor the output in isolation.
1
2
7
4
3
9
8
6
12
13
14
15
16
17
10
11
5
9
