Wharfedale Pro EZ-M mini-mixer 10x2 Owner'S Manual Download Page 12

SPECIFICATIONS    

                                                                                                           

EZ-m mini-mixer 10X2 Specifications 

Maximum Output Level    
(1%T.H.D. @ 1kHz) 

+22dBu over 130mw (headphone) @ 32 ohms 

THD+N% <0.01% 

+15dBu 

Frequency Response 

20Hz-20kHz +0/-1dB 

Hum and Noise 

-127dB Mic Pre Equivalent Input Noise                                            
'-90dBu Residual Noise 

Maximum Input Levels 

Mic In: '+10dBu                                                                                   
Line In: '+20dBu                                                                                  
2TK In: '+20dBu 

Mono Input Channel 
Gain 

50dB Variable (-60~-10dB) (-40dB~+10dB) 

Input Channel EQ 

High (+/- 15dB) 12kHz Shelving                                                   
Low (+/_15dB) 80Hz Shelving 

Level Meter 

4-Segment LEDx2 (output of '+4dBu = MAIN L/R 

Clip Indicator  

Turns on 16dBu 

AC Power options 

AC100V/120V/230V/240V, 50 Hz/60Hz 

Dimensions 

253mm x 77mm x 226mm / 9.96" x 3.03" x 8.89" 

Weight 

1.44kg / 3.16 lbs 

 

 

Details, features and specifications subject to change without notice. 

 

 

 
 
 
 
 
 
 
 
 
 

 

 

                                                      

 
 
 
 

                                                           10

 

 
 

Summary of Contents for EZ-M mini-mixer 10x2















Reviews: