4
(1) MASTER
Adjusts the master output volume
(2) RCA inputs
For connection of inputs from laptop, phone or other line level
sources
(3) TALK
This button ducks the volume of the mp3 player signal by 40dB
when a microphone signal is detected.
(4) XLR input
For an (optional) wired microphone input
(5) Mic jack input
For an (optional) wired microphone using a 1/4” jack input
(6) ECHO VOLUME
To control the amount of ECHO applied to the mic inputs
(7) BATTERY LOW INDICATOR LEDs
Will show as GREEN in a normal working state but will show RED
when the internal battery becomes low.
(8) MIC IN CHAN 1
This adjusts the optional wired mic input level
(9) MIC IN CHAN 2
This adjusts the input of both supplied wireless mics.
(10) MP3 PLAYER section
Includes TF card reader, USB connection and Bluetooth system.
To pair over Bluetooth search for the Bluetooth device called
‘VIRE BT’. The passcode is 0000. The IR receiver for the remote
control is also located in this section. Point the remote at the
rear of the EZ-A to control.
(11) LINE OUT
Line out connectors to connect to other audio devices (such
as a mixer or other powered speakers)
(12) MP3 / LINE
This selects between the internal MP3 player or Bluetooth
input OR the line input connectors
(13) 5-BAND GRAPHIC EQ
Use these controls to control the overall sound
(14) POWER BATT / OFF / AC
a. BATT. Battery supplies the power
b. OFF. The system is shut down
c. AC. 100v - 240v input supplies the power
(15) IEC SOCKET
For AC connection which also charges internal battery
(16) MP3 Vol
This adjusts the level of the MP3 / Bluetooth input
EZ-A REAR PANEL FEATURES
Battery charging.
To charge the battery, put the AC/OFF/BATT switch
into the ‘OFF’ or the ‘AC’ position. The RED ‘Charge’
LED will light while the internal battery is being
charged. When the battery is fully charged, the RED
‘Charge’ LED will go out.
