OPERATING MANUAL AND USER GUIDE
11
RIGGING/SUSPENDING
Using Shoulder Eyebolts
Always apply the load to the bolt along the plane of the eye. For long term
installation use a thread-locking compound. Do not attempt to bend or otherwise
deform any rigging hardware.
Please refer to the important safety warnings before you consider
suspending any loudspeakers.
(A minimum 5:1 Design Factor or Local Standard should
be observed, whichever is greater)
Each primary load bearing suspension point shall be rated for the total load.
Forged shoulder eyebolt
(User supplied, overhead
suspension rated and certified)
Secondary Suspension Point
Forged shoulder eyebolt
Working load limits:No more than four (4) high (vertical)
The four (4) high vertical specification represents a static ratio of 7:1
Delat User Manual.indd 11
2010-12-13 9:15:21
