Stock # XLSFEC54-WN
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing Inc.
Page 8 Factory No. 10944
Assembly Instructions for Table-top Console
Tools required: Allen wrench (provided), Phillips screwdriver, Mallet, Power Drill, and 3/8” Drill Bit.
8. Position the assembled console at the desired location against a wall. If necessary, adjust the
installed Large Floor Leveler (10) and the pre-attached Small Floor Levelers at the bottom of
Side Frames (E and F) to level the unit. Now, follow the instructions printed on the plastic bag
containing the Tipping Restraint Hardware to attach the tip-over restraint to the Top Shelf (A)
and the wall.
NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO
THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES.
9. The table-top console is now ready for use. Be sure to position your Flat Panel TV in the
center of the console.
NOTE
: For Tilting Wall Mount, proceed to PAGE #18.
TV
E/F
E
F
C
