14
Assembly Instructions
22.
Flip the assembly around at its front edges.
23.
With the pilot holes as a guide, fasten two Straight Metal Brackets (9) at the joints between the Middle
Crossbar (J) and Middle Stiles (K and L), using two 15 mm Flat Head Screws (5) per bracket.
24.
Insert two 25 mm Screws (6) through the countersunk holes on the Middle Stiles (K and L) and securely
screw into the Middle Crossbar Assembly (J) as shown.
25.
Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are
tight and there are no gaps between the parts. This will help keep the unit square.
26.
Pick up the Upper Back Panel (P) and align the pre-drilled holes against the upper long edge with the
pilot holes on the back stretcher of the Top Panel (A). Attach the Back Panel (P) in place using the
provided Washer Head Screws (8).
27.
Attach two Lower Back Panels (Q) to the mantel frame with the provided Washer Head Screws (8).
J
K
L
9
5
6
UP
UP
Q
Q
P
8
8
P/Q