Page # 3
Assembly Instructions
Note: Assemble the unit on a sturdy and level surface. Avoid assembling on carpet. To
facilitate assembly we recommend having two persons assemble the unit. If you do
not understand these directions, or have any doubts about the safety of the
installation, please call a qualified contractor or contact Whalen Storage at 1-866-942-
5362. We can assist you or give you directions.
If you have any defective parts please do not use, improper installation may result in
damages or injuries.
1.
Unpack the unit and confirm that you have all the hardware and required parts listed. To
facilitate the assembly, you could sort all parts by alphabetical order.
2.
Have each pairs of Plastic Brackets (D) hooked at your desired height of each Lower Post
(A). Be sure each pair of plastic brackets hooked at the same level, and then get each lower
post through the tubing of Wire Deck (C) one by one. As shown in detail #1.
Note: Hold the plastic brackets firmly while lowering decks, a couple of taps are required.
Make sure the plastic brackets hooked at your desired height. And also make sure the two
rings of the plastic brackets both hooked in the two grooves of the post;
Every 7 grooves, there is a double-grooves, the shallower one of the double grooves is
intended for assembly height identification purpose only,
Now you have a base standing there. Repeat above steps to assemble the second level.
