Whalen WS-NIR772472WWD-BW Manual Download Page 7

Page: 7 / 8

Please call for replacement parts or assistance:

1-866-942-5362

Whalen Storage

Factory No. 14400

Page # 7

Assembly Instructions

If you buy more than one unit, additional assembly options are available.

10. Position two Racks in line with the desired space between them. Leave enough

space to fit the Cross Beams (part B). Insert additional beam levels as desired to
form additional space.

11. Insert Wire Decks (part C) as desired.

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Your assembly should now be complete.

Thank you for your purchase.

Visit us on the web:、

Summary of Contents for WS-NIR772472WWD-BW

Page 2: ...torage Factory No 14400 Page 2 Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly A Upright Frame 2 ea B Cross Beam 8 ea C Wire Deck 4 ea D Channel 16 ea Tool Required Rubber Mallet not provided ...

Page 5: ...steps 2 through 4 to attach next beams levels as shown in detail 2 Note The shelf levels are adjustable in 3 increments You can adjust the wire deck shelves at your desired height 6 To complete the frame assembly repeat steps 2 through 4 to attach the last two Cross Beams part B on the top two keyholes of Columns as shown in detail 3 ...

Page 6: ...hannel part D into slots in load beams as shown in detail 4 Repeat step 7 to install the remaining channels to the rack Make sure all of the channels are seated completely 8 Insert wire decks onto shelves assembly as shown in detail 5 9 Periodically inspect the unit to ensure beams are seated properly and clips are firmly connected to the columns ...

Page 8: ...Factory No 14400 Page 8 IF YOU NEED TO ORDER PARTS PLEASE USE THE LIST BELOW INDUSTRIAL RACK WITH INTERLOCKING WIRE DECKS Made in China E WS NIR 772472WWD BW 1 UF Upright Frame WS NIR 772472WWD BW 2 CB Cross Beam WS NIR 772472WWD BW 3 WD Wire Deck WS NIR 772472WWD BW 4 C Channel ...