1
2
3
ASSEMBLY INSTRUCTIONS
Step 1: Adjustable Level
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or install the product.
WARNING
CAUTION
Do not stand on vanity. Use vanity on level ground. Base vanity supports a maximum weight of 200 lbs. Exceeding maximum
weight limit will compromise the integrity of the vanity structure and could cause the vanity to fail.
Do not hang from the vanity.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:
15 minutes
Tools Required (not included): Silicone compound.
PACKAGE CONTENTS
B
C
A
PART
DESCRIPTION
QUANTITY
A
Vanity Top (preassembled)
1
B
Vanity Base
1
C
Backsplash
1
3
2
C
A
Silicone
1a. In case of uneven floors, floor levelers are provided at the bottom of the
vanity. If necessary, adjust floor levelers by hand to correct tilting and/or
level doors.
2a. To mount the backsplash (C) to the wall, apply a thin bead of silicone
compound (not included) to the unpolished back side and bottom of the
backsplash (C). Position backsplash (C) as shown onto vanity top (A)
and against the wall. Clean any excess silicone compound before allow
-
ing to dry.
Step 2: Backsplash Installation
3a. If the doors preassembled to vanity base (B) require adjustment, follow the
below options as needed:
To adjust door up or down, loosen screws (a), adjust door and retighten
screws.
To adjust door left and right, turn screw (b) in or out.
To adjust door in and out, loosen screw (c), adjust door and retighten screw.
Step 3: Hinge Adjustment For Door Alignment
B