4
Assembly Instructions
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1.
Unpack the unit and confirm that you have all the hardware and required parts.
2.
Tightly screw the Floor Levelers (1) into the threaded inserts underneath the Left and Right Side Panels
(B and A) by rotating clockwise.
3.
Locate the Back Panel (E) and place it on a scratch free surface with cleat facing up, as shown.
4.
Align and attach 4 Metal Brackets (2) to the Back Panel (E) using the provided 1/2” Allen Bolts (4).
Make sure the right angle side of each Metal Bracket (2) is flush with the short side of the Back Panel
(E). Securely tighten the bolts with the provided Allen wrench.
5.
Repeat the same procedure to attach 4 Metal Brackets (2) to the Front Panel (F).
F
E
4
2
4
2
2
4
2
4
A
1
1
B
