
5
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), both Side
Frames (B and C) and Middle Stile (H) with a Phillips screwdriver.
NOTE:
Screw-in cam bolts must be screwed down flush.
3.
Insert two Wood Dowels (3) into the inner holes on the long edge of each Partition Panel (D and E).
Make sure that you use a small amount of glue with both ends of all dowels.
NOTE
: It is very important to use a small amount of glue on both ends of dowels.
A
H
H
B
C
D
E
3
3
3
3