Model # BBXLGTS46DW
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing
Page 21
Factory No. 10944
Assembly Instruction for installing Mounting Frame onto BRICK, SOLID CONCRETE
OR CONCRETE BLOCK
NOTE
: If you are mounting your TV to a wall with wooden studs, skip this section.
This assembly
requires an
electric drill and level (not included).
32.
Begin by placing the Mounting Frame (K) level against the wall where you intend to mount the
TV. Using the Mounting Frame (K) as a template, mark 4 drill points with a pencil.
33.
With an electric drill (not included) on its low setting, drill 7/16 inch diameter holes to at least
2½ inch deep. Insert Concrete Anchors (7) into pre-drilled holes so that they are flush with the
wall.
34.
Place the Mounting Frame (K) level in the desired position against the wall. Secure the
Mounting Frame (K) to wall with Lag Bolts (8) and washers (9) at the drill points.
Tighten bolts
firmly, but be careful not to over tighten.
Concrete Anchors should only be used for masonry mounting.
NEVER use the wall anchors to mount the unit to drywall.
Maximum weight 135 lb. (61.2 kg)
