11
Assembly Instructions
15.
Now, go back and tighten all Cam Locks and Screws, make sure that all the parts are tight and there are
no gaps between the parts, this will help keep the unit square.
16.
Flip the assembled unit around at its front edges. Unfold the Back Panel (P) and position it onto the
back edges of the assembly. Make sure that the overlaps on the panels are even all the way around.
Secure the Back Panel (P) in place with the 15 mm Washer Head Screws (6).
NOTE
: We recommend attaching back panel with the screws at the corners first.
17.
Ask for assistance to stand the assembled unit upright.
18.
Insert the Shelf Supports (8) into the desired holes in the sides of the side compartments. Make sure you
place the four Shelf Supports (8) in the same level so the shelf is not tilted. Tilt and rest the Adjustable
Shelves (N and O) onto the Shelf Supports (8).
I
P
P
6
G
I
H
J
A
N
O
N
N
N
8
8
N/O
