Model # AT3260-12BT
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing
Page 4 Factory No. 16434
Assembly Instructions
NOTE:
Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Fasten the Bottom Shelf (E) to the Left Leg (F) by using two 1-1/4” Bolts (2) with Lock
Washers (3) and Flat Washers (4) through the side rail of bottom metal frame and screw into
place. As shown. Be sure the metal frame will face the floor when the unit if turned upright.
3. Fit the notches of Middle Shelves (B, C and D) onto the metal brackets of the Left Leg (F) and
secure them in place using two 1/2” Wood Screws (5) in each. As shown. Make sure that the
center cutout of the Middle Shelf (C) will point towards the back of the unit.
4. Repeat the same procedure to attach the Right Leg (G) at the opposite end.
D
E
2
3
4
F/G
F
B
C
E
G
F/G
B/C/D
5
1/2” Wood Screw
(12 used in this step)
⑤
1-1/4” Bolt
(4 used in this step)
②
Lock Washer
(4 used in this step)
③
Flat Washer
(4 used in this step)
④
