21
Assembly Instructions
40.
Insert the Shelf Pins (10) into the desired holes in the sides of the compartment. Make sure you place
four Shelf Pins in the same level so the shelf is not tilted. Tilt and rest the Adjustable Shelf (N) onto the
Shelf Pins (10).
41.
Insert the assembled Drawer into desk frame. Extend the Ball Bearing Slide Tracks on the Panels all the
way forward (including ball bearing cart). Then align the Slide Runners on the assembled drawers with
the Slide Tracks and push the drawer carefully inside until it stops.
NOTE
: If the drawer does not go in smoothly, please take it out and repeat the step. If you need to
remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release
lever of the ball bearing slides up on one side and down on the other side, and then pull it completely out.
B
C
N
