Note:
Annually at the end of the season, fully drain all water in the pipework and pump chamber. Whale® cannot
guarantee warranty if the system is not fully drained for winterising.
Service kits available: AK3706 and AK3714
For installation or service advice please contact Whale® Customer Support:
Tel: +44 (0)28 9127 0531
Email: [email protected]
www.whalepumps.com
This product complies with all relevant European directives and standards. Please contact Whale® if further details
are required
Manufacturer’s Declaration
We hereby declare, under our sole responsibility, that the enclosed equipment complies with the international
standard EN ISO 15083:2003 - Small craft-bilge pumping systems.
Engineering Director
Date: October 2016
WHALE® and GUSHER® are registered trademarks of Munster Simms Engineering Limited, Bangor, Northern
Ireland trading as Whale.
This Whale® product is covered by a 5 year warranty. Please see the enclosed document for details of our
Statement of Limited Warranty.
©Copyright Whale 2017 - All rights reserved. Reproduction in whole or in part without permission is prohibited.
WHALE® is a registered trademark of Munster Simms Engineering Limited, Bangor, Northern Ireland trading as
Whale. Whale’s policy is one of continuous improvement and we reserve the right to change specifications without
prior notice. Illustrations are for guidance purposes only. Neither the accuracy nor completeness of the information
contained in any Product brochure is guaranteed by the Company and may be subject to change at its sole discre-
tion.
Please note that by contacting Whale Support you will be indicating your consent to receiving product updates,
recall information, help guides and appropriate marketing messages from us via post, email or telephone unless you
indicated an objection to receiving such messages.
10.
WINTERISING
9.
TROUBLE SHOOTING
13. PATENTS AND TRADEMARKS
14.
WARRANTY
Fails to prime
Inlet hose fault
Check inlet hose connection is airtight, free from blockages and does not
collapse during suction stroke
Diaphragm failure
If damaged replace all rubber parts (see Service kits)
Debris in the body
of the pump
May not prevent its operation but should be removed to prevent
damage
Inlet and/or
outlet valve failure
Inspect and remove any debris. If damaged replace (see Service kits)
USA Tel: 1 802 367 1091
USA Fax: 1 802 367 1095
Email USA: [email protected]
www.whalepumps.com
11.
SERVICE SUPPORT DETAILS
12.
DECLARATION OF CONFORMITY, STANDARDS AND APPROVALS
6
Summary of Contents for Gusher 10 Mk3 BP3708
Page 7: ......