background image

Tiptoe Pump

Mk.4 GP1309

Read carefully before
installation and use.

To the Fitter

Check that the product is
suitable for the intended applica-
tion, follow installation instruc-
tions and ensure operating
instructions are passed on to the
end user.

To the User:

Read the following instructions
carefully.

Application:

This product is designed for
use as a fresh water foot
pump in caravans and boats.
Use for any other purpose or
with any other liquid, is not
recommended and is entirely
at the user's risk.

The Whale Tiptoe can be
used as a manual back-up
with an electric pump
provided that:
1. It is not a pressurized
system.
2. It is placed between the inline
electric pump and the
water supply.

Installation

Choose an installation where
the pump can be operated
comfortably.
1. Cut a 3" (75 mm) diameter
hole in the floor.
2. Floor thickness: minimum
3/8" (10 mm), maximum 2" (50
mm).
3. One piece assembly fits
directly onto floor.
4. Secure with 3 screws.

Operation:

1. Release plunger plate by
twisting anti-clockwise. 
2. Pump up and down with your
foot; vigorously for full flow,
gently for controlled flow.
3. When pumping is finished,
push the plunger fully down,
twist clockwise to lock.

Maintenance

Regular inspection of valves
and seals is recommended
with cleaning and replacement
of components as necessary.
Service kit AK1304 is available
from dealers.

Note: 

For winter storage,

ensure that the pump is
drained completely to avoid
frost damage.

Helpful hints

a) The pump can be serviced
using Service Kit AK1304
which contains the complete
set of washers for the Mk3
and Mk4 pump.
b) If the pump is slow to
prime, the cup washer may
be worn or valves are not
seating properly. Check and
replace these if necessary
using Service Kit AK1304.
c) If the pump will not pump:
- check that the suction line is
in the water.
- check that the hose connec-
tions are secure and there are
no air leaks.
- check the washers in the
pump, they may need to be
replaced.- if the outlet is an
on/off faucet or tap, make sure
that it is open to allow water to
flow.
d) If the pump is leaking, it is
likely that the gland washer is
worn. A replacement for this
part is contained in Service Kit
AK1304. 

Warranty

This Whale product is covered
by 5 years warranty. Please
see the enclosed document
for details of our statement of
limited warranty.

Outlet port

Inlet port

Modular

Tap

GP74

Electric

Pump

Inline

water filter

Tiptoe

Pump

Hose

socket

Outside

water supply

Summary of Contents for GP1309

Page 1: ...s finished push the plunger fully down twist clockwise to lock Maintenance Regular inspection of valves and seals is recommended with cleaning and replacement of components as necessary Service kit AK1304 is available from dealers Note For winter storage ensure that the pump is drained completely to avoid frost damage Helpful hints a The pump can be serviced using Service Kit AK1304 which contains...

Page 2: ... Ireland Tel 44 0 28 9127 0531 Fax 44 0 28 9146 6421 Web www whalepumps com Email info whalepumps com Contained in Service Kit AK1304 Valve retaining washer Bottom valve washer O ring Gland U packing Plunger valve washer Cup washer Plunger valve plate Circlip ...

Page 3: ... recommandé de contrôler régulièrement les valves et les joints lorsque vous nettoyez et remplacez des composants en cas de besoin Les pièces de rechange et les kits d entretien sont disponibles chez les revendeurs ou directement auprès du fabricant Remarque Lors du stockage d hiver assurez vous que la pompe est entièrement purgée afin d éviter des dommages causés par le gel Astuces utiles a Lorsq...

Page 4: ... une modification non autorisée ou d une mauvaise utilisation du produit Les conditions mentionnées ci dessus n affectent en rien vos droits légaux Munster Simms Engineering Lltd 2 Enterprise Road Bangor Ireland du Nord Tel 44 0 28 9127 0531 Fax 44 0 28 9146 6421 Web www whalepumps com Email info whalepumps com Ref No sr_180 05_v6_0115 Dans le Kit d entretien AK1304 Rondelle de retenue de la valve...

Reviews: