Wfly X4, Instruction Manual

Page: 52 / 56

System Settings
Adjustment
When the throttle and steering wheel will make the mechanical deviation, use calibrational
function to correct.
Setting method:
1
,
According to "neutral" prompt, put the trigger, the runner on the midpoint,
press the confirm key.
2,According to the prompt "endpoint" , put the trigger ,wheel into the midpoint
struck several times respectively
(
lightly lean is ok, as the following graph), stop
on the middle point at last press confirm key.
3,The prompt completion, exit to the standby interface. indicate failure, repeat
steps 1 ~ 2.
Backlight Lamp
The Tone
52
buckle
up
Set: Main Menu
→
SYSTEM
→
VOICE
Set: Main Menu
→
SYSTEM
→
B-LIGHT
natural
natural
t
si
wt
tw
is
t
Endpoint Calibration
Set the backlight mode and time.
Mode:
OFF, no backlight lamp.
ON, duration of bright.
Button, when the button action occurs the light will flash for a period of time.
Time:
key mode, backlight brightness time. 5~60s.
Can set the tone and volume of the remote control device
20 grade volume settings.
The volume is too high so it will influence others, appropriately control volume.
Function Description