Wexxar WF30T, Operation And Service Manual

Page: 85 / 190

WF30T Case Former Other Machine Adjustments
8-72
8 OTHER MACHINE ADJUSTMENTS
8.1 Safety
Equipment Safety
The WF30T has safety features to prevent you from injury while machine adjustments are being
performed. Sliding and bi-folding guard doors, equipped with interlock switches, are in place to
prevent you from entering the work cell while the case forming is in progress; the machine will not
run if these doors are open. The access door of the electrical enclosure also has to be closed for
the machine to operate.
The perimeter guarding system surrounds the area known as the
restrictive envelope
and covers
the entire range of possible machine motion. For your safety, you should never try to bypass the
perimeter guarding system or enter the restrictive envelope while the machine is in operation.
An
‘EMERGENCY STOP’
button is provided to immediately halt all machine operation by cutting
off air supply and electrical power. This button should be pushed
IN
to stop the machine in case
of an emergency.
Precautions
•
Always follow the applicable specified procedure when making machine adjustments.
•
The WF30T Case Former is equipped with safety interlocks. Do not attempt to disable or
bypass the safety interlocks or any other safety features while machine adjustments are
being performed.
Applicable Laws
•
Before making any adjustments to this machine, disconnect the power and lock out
according to local regulations.