WD-6C
Rev. 7.0 (202202)
Safety instructions
6
In order to avoid dangerous situations, the following must be followed:
•
Switch off the machine immediately in the event of failure or malfunction.
•
Make sure the machine is non-live before removing the cover plate. Turn
off the power using the power switch. If required, the switch must be locked
to prevent unintentional operation.
•
Shut off the tap for incoming water and drain the machine’s tank(s) before
starting work. Let the machine cool down as pipes for water, washing
pumps, booster heaters and valves become very hot when the machine is
in operation.
•
The machine and equipment requires an annual service. The machine
should be serviced by a person authorised or trained to do so by us. Use
original spare parts.
•
Warranty repairs must be performed by an authorised company. Contact
an authorised service company to draw up a programme of preventive care
and maintenance. For authorised service companies, please see
www.wexiodisk.com or contact Wexiödisk AB.
•
The regular checks described in the manual must be carried out in
accordance with the instructions.
2.2
Transport
Handle the machine with care during unloading and transport; there is a risk of it
tipping over. Never lift or move the machine without using the wooden packaging
to support the stand.
2.3
Installation
•
The machine is designed for quick electrical installation.
•
The machine must be connected to a lockable power switch.
•
Make sure that the mains voltage is the same as that indicated on the
machine’s rating plate.
For increased safety, it is recommended to equip the installation with a ground
fault circuit breaker.
2.4
Detergent and drying agent
Be aware of the risks involved in handling detergents and drying agents.
Protective gloves and safety glasses should be used when handling, and an
eyebath should be within easy access. Read the warning text on the detergent
and drying agent containers as well as the detergent supplier’s instructions.
Summary of Contents for WD-6C
Page 2: ......
