41
(Subject to change)
Wet vacuum cleaning
Description
Definition / objective
Removing
the
dissolved dirt and the remaining cleaning solution or the dirty liquid
from floor coverings using the
wet vacuum cleaner with water nozzle. Suitable for water-resistant floor coverings.
Preparatory work
Select suitable products to match the surface to be cleaned (type / square metres) and the type of
soiling.
Check, equip and ready the machine and all accessories in compliance with the instructions for use.
Put up the warning sign.
As a general rule: Wet scrub or wet mop the floor covering beforehand.
Main task
Wet vacuum the floor covering using the wet vacuum cleaner in slightly overlapping passes.
Start at the door and work your way into the room. Note: Always stand in the dry area.
Once the tank of the wet vacuum cleaner is full, pour the dissolved dirt and the vacuumed cleaning
solution down the drain.
Perform a visual check.
Final steps
Pour the waste water from the tank of the wet vacuum cleaner down the drain.
Rinse the tank, the suction nozzle and the hose with water.
Check the power cable for visible damage, clean the cable and roll it up loosely towards the plug.
Remove the warning sign once the floor covering is dry.
Dispose of any waste.
Clean the cleaning equipment and replace as needed.
Comments
-
Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or
instructions for use.
-
Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).
-
Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.