Wetif TIG97, User Manual

Page: 62 / 66

- 46 -
BIOS
5.4 Security Settings
The
Security
setup screen allows you to configure BIOS security settings to
keep unauthorized people from making any changes to the BIOS.
InsydeH20 Setup Utility Rev. 5.0
Advanced Security Power Boot Exit Main
Supervisor Password Not Installed
Set Supervisor Password
Change Values F5/F6
Select

SubMenu Enter
Select Item
Select Menu
F1
Exit ESC
Help Setup Defaults F9
Save and Exit F10
Install or Change the password
and the length of password must
be greater than one character.
The
Security
screen provides the following setting options:
Settings Descriptions
Set Supervisor
Password
To set up a supervisor password.
After selecting
Set Supervisor Password, a dialog box then pops
up on-screen. Enter and confirm your desired password. The
length of the password must be greater than one character.
To change an existing supervisor password, you will need to enter
the original password.
Power on
Password
This item is available only when supervisor password is set.
Enables/disables power on password.
If enabled, you will be prompted to enter the supervisor password
on POST time.