CHAPTER 3 – Protecting & Maintaining
21
Restoring the Operating System
Your computer is equipped with a copy of our pre-installation on a separate
partition of your hard disk. This image can be re-loaded on your computer
using the provided
WETIF
Restore USB-Key. Follow the procedure below
to reinstall the Operating System (windows) as it was shipped out of the
factory. Be aware that using the Restore Key will PERMANENTLY DELETE
ALL SOFTWARE, CURRENT INSTALLED PROGRAMS AND DATA on your
Computer.
WETIF
is not liable for the loss of Software, Programs and/or
data.
I
n case you decide to restore the copy, please follow the next procedure
carefully:
1. Always, first make a copy of your data on an external storage-device.
2. Attach the tablet, in power-down mode, to the ac-adapter.
3. Place the enclosed
WETIF
restore key in the USB slot.
4. Turn the system on.
5. The system will now boot from this
WETIF
restore key and come
with a notification stating that all software and data will be lost by
continuing. After reading and thus accepting this, you can hit any key
(up/down/enter) to continue.
In case your system does not boot from the USB key please change the
boot sequence to “USB ZIP” (P8) in the Bios. For more detailed
information you can check the appropriate chapter in this user manual.
6. The system will now continue and display the following screen:
7. You are giving the option to cancel this complete operation by activating
the “Cancel” button on the display. If you are sure you want to continue
to restore the Operating System, activate the ‘Continue’ button (or
press “UP” or “DOWN” and than “Enter”). The system will start the
WARNING:
USING THE RESTORE KEY WILL PERMANENTLY
DELETE ALL SOFTWARE, CURRENT INSTALLED PROGRAMMS
AND DATA.
