Wetelux 88 96 98, Instruction Manual, Page: 14 / 22

10
Operation
Mounting/Installation

Remove the four screws from rear side of the LED spot-
light and remove the rear part of the housing. Turn off
the nut from the cable gland (1) and lead the power ca-
ble through the cable gland at the side of the housing.
Then turn on the nut again.

Connect the three wires of the power cable, as pictured
below, with the lustre terminal which is located inside
the housing of the LED spotlight. Then secure the pow-
er cable with the strain relief. Reassemble the housing
in reverse order and secure it with the four screws.

Install the wall mount (5) with two or three suitable
screws securely to an appropriate place.

Tilt the spotlight to the desired angle and tighten the
screws at the hinge of the wall mount to secure its posi-
tion.
L = Brown / Black
= PE (Green/Yellow)
N = Blue
Cleaning
Clean the housing of the spotlight only with a dry or lightly
moistened cloth. Do not use aggressive chemicals or
abrasives for cleaning.