Operation
IX
Before first use remove the plastic isolation
plate from the battery compartment.
Replacing the Batteries
1. Press on the fluted area on
the battery compartment
lid (2) and slide the lid in
direction of the arrow to
open the battery compart-
ment.
2. Insert two new batteries of
the type CR2032 into the
battery compartment. Pay
attention to the proper
polarity of the batteries.
The polarity is printed inside the battery compartment.
3. Close the battery compartment with the lid.
Replace both batteries when the light of the LED shines
weak or if it does not shine at all.
Using
1. Press the on/off button (1) to switch on the clip light.
2. Press the on/off button again to activate the flashing
mode.
3. Press the on/off button once more to switch off the clip
light.
4. Clip the LED light on the screen of your cap. Tilt the
LED unit to the desired angle (e.g. for reading).
1
2
