12
Operation
Motion Controlled Operation
You can adjust the motion sensor (4) horizontally and vertically.
For vertical adjustment, unscrew the wing screw and hand tight
the wing screw after adjusting it. To adjust the motion sensor hor-
izontally, grasp the whole sensor and turn it very carefully to the
left or to the right to the desired direction.
Use the Illumination Duration Rotary Knob (7) to setup how long
the unit stays lit after motion stops in the field of vision. The time
can be set from 9 seconds to 10 minutes. Please note, once the
light has been triggered by the sensor any subsequent detection
will start the timed period again from the beginning.
LED spotlight has a built-in sensing device (photocell) that de-
tects daylight and darkness. Turn the light sensitivity rotary knob
(6) towards (
☼) to have the motion sensor turning on the light in
brighter illumination conditions, turn it to (
) to have the light acti-
vated only in darkness.
The LED spotlight automatically switches on each time the mo-
tion sensor (4) detects motion within its field of view. The light will
turn off after the set time when no more motion is detected.
Note:
The max. range of the motion sensor depends on the am-
bient temperature. In cold environments, the range is higher.
Cleaning
Clean the housing of the spotlight only with a dry or lightly mois-
tened cloth. Do not use aggressive chemicals or abrasives for
cleaning.
Keep the motion sensor (4) clean at all times.
