VIII
Introduction
Operation Method
The dummy dome camera looks just like the real thing and
should scare off any potential burglar or thief. The in-built
flashing LED simulates monitoring, acting as an added
deterrent. The camera can be used in many different
situations, e.g. in shops, residential buildings, shopping
centres, factories as well as in various public facilities.
Inserting / Replacing the Batteries
1. The battery compartment is located at the read side of
the dummy dome camera. Depress the latch of the bat-
tery compartment lid and open the battery compartment.
2. Insert two new 1.5 V batteries of the type LR6 (AA) (not
included). Pay attention to the proper polarity. The
polarity is printed inside the battery compartment. The
LED (3) of the dummy camera starts flashing.
3. Close the battery compartment with the lid.
Replace both batteries when the LED stops flashing.
