15
Operation
Mode 6: Display of Cost
In this mode, the total costs of the electricity consumed by the appliance
connected to the unit are displayed. The cost is based on the price input
in mode 7 (see index on page 11).
The cost is shown in the display from £ 0.00 to £ 9999. The € symbol
represents all other currencies.
For information on resetting the recorded total cost, see “Resetting Modes
4, 5, and 6”.
Mode 7: Electricity Price Display/Setting
In this mode, the electricity price per kWh is displayed and set. The price
input here affects the “costs of electricity consumed” displayed in mode 6.
Input the electricity price as follows:
1. If necessary, press the button FUNCTION to change to function 7.
2. Press SET button, causing the first digit to flash.
3. Press CHANGE button once to raise this value in increments of 1.
4. Press SET button, causing the second digit to flash.
5. Repeat steps 2 and 3 to enter the remaining digits making up the price.
6. Press SET button, causing the decimal point to flash.
7. By means of the CHANGE button, move the decimal point to the
correct position in the price display.
8. Confirm your input with the SET button.
Example: Setting a price of £ 0.38 per kWh
The € symbol stands for every other currency. Call up the display for
Mode 7 and press the SET button. While the first digit is flashing, press
the SET button twice, leaving the first and second digits unchanged at 0.
Press the CHANGE button and set the third digit to 3, then press SET
again. Press the CHANGE button and set the fourth digit to 8, then press
SET again. Now position the decimal point in front of the 3 with the
CHANGE button and confirm your input by pressing the SET button.
Alternatively, the second digit can be set to 3 and the third digit to 8 and
the first and fourth digits left at 0. This method will achieve the same result
as that described above.
